Showing all 5 results
Blind- Select optionsMaterial – Mild Steel
Material – Mild Steel
Mild Steel Pipe Nipples- Select optionsDescription:
(i) Mild steel Fittings is a type of carbon steel fitting with low carbon content, and it’s also called low carbon steel fittings.
(ii) Mild steel pipe nipples are either painted black or galvanised.
(iii) At Sunelwala Dubai, we stock and supply mild steel pipe nipple with pressure SCH. 40, SCH. 80, SCH 160; ends PBE, TBE, TOE; pipe size ranging from 1/2” – 8” and length size from 50 MM to 300 MM.
(iv Looking for a comprehensive range of mild steel pipe nipples in the Middle east, then look no further than SWBM Dubai.
Slip On RF Flanges- Select optionsDescription:
(i) Slip on flanges are slipped over the pipe and welded (usually both inside and outside) to provide strength and prevent leakage.
(ii) These slip on can sometimes have a boss or hub, and can be made with a bore to suit either pipe or tube.
(iii) At SWBM Dubai, we supply mild steel slip on flanges with pressure ANSI std CL150, CL 300, CL600, British std PN10, PN16, PN25, Japanese Std JIS 5K, JIS 10K, SABS 1123, T1000/3, Table D, Table E; face FF, RF, RTJ; sizes ranging from 1/2” – 24” .
(iv Sunelwala Dubai is one of the oldest dealers, distributors, stockists & suppliers of Slip on flanges in the Middle east region.”
Threaded Flanges- Select optionsDescription:
(i) Threaded Flanges (Screwed flanges) are similar to slip-on flanges in outline, but the bore is threaded, thus enabling assembly without welding.
(ii) Threaded Mild steel flanges are mostly used in low pressure piping systems. (iii) At Sunelwala Dubai, we are stockists and providers of mild steel threaded flanges with pressure CL150, PN16; face FF, RF; sizes ranging from 1/2” – 6” (iv SWBM Dubai maintains ready stock of Threaded Flanges and supplies them to various countries in the MENA region.
Weld Neck- Select optionsDescription:
(i)Weld Neck Flange is flanges that are designed to be joined to a piping system by butt welding.
(ii) Wild neck flanges are expensive and preferred for high stress applications.
(iii) At SWBM Dubai, we provide mild steel weld neck flanges with pressure American standard CL150, CL 300, CL600, British standard PN16; face FF, RF, RTJ; schedule SCH 40, SCH 80, SCH 160, SCH STD, SCH XS; sizes ranging from 1/2” – 24”
(iv) Based out of Dubai, SWBM is a leading provider of high quality, high performing Mild Steel flanges of varied specifications and brands.