(i) Stainless steel 316 Lap joint flanges are used with a stub end, which is welded to the pipe.
(ii) As the Lap joint flanges don’t come in direct contact with the inner fluid they don’t get corroded and can be reused.
(iii) At SWBM Dubai, we sell stainless steel 316 weld neck flanges with pressure American Standard CL150, CL 300, CL600, British standard PN16; face FF, RF; sizes ranging from 1/2” – 12”
(iv Looking for premium quality Lap joint flanges in the MENA region, contact us now.”
Description
Material – Stainless Steel 316
Additional information
| Weight | 1 kg |
|---|---|
| Pressure | CL150, CL300, CL600, PN16 |
| Face | FF, RF |
| Sizes | 1-1/4", 1-1/2", 1/2", 1", 2", 2-1/2", 3", 3/4", 4", 5", 6", 8", 10", 12" |
Related products
-
Threaded Flanges
Add To QuoteDescription:(i) Threaded Flanges (Screwed flanges) are similar to slip-on flanges in outline, but the bore is threaded, thus enabling assembly without welding.
(ii) Threaded Mild steel flanges are mostly used in low pressure piping systems. (iii) At Sunelwala Dubai, we are stockists and providers of mild steel threaded flanges with pressure CL150, PN16; face FF, RF; sizes ranging from 1/2” – 6” (iv SWBM Dubai maintains ready stock of Threaded Flanges and supplies them to various countries in the MENA region.
-
Threaded
Add To QuoteDescription:
(i) Threaded Flanges are used in low pressure systems.
(ii) Threaded brass flanges are used in special applications where the flange can be assembled to the piping system without welding.
(iii) At SWBM Dubai, we are stockists and providers of brass threaded flanges with pressure ANSI standard CL150, British standard PN16; face FF, RF; sizes ranging from 1/2” – 6”
(iv) Sunelwala Dubai maintains extensive stock of Brass Threaded Flanges and supplies them to various countries in the Gulf region.
-
SS Slip On
Add To QuoteDescription:(i) The flange is slipped over the pipe and then welded both inside and outside to provide sufficient strength and prevent leakage.
(ii) This flange is used in preference to weld necks because of its lower cost.
(iii) At SWBM Dubai, we provide stainless steel 316 slip on flanges with pressure CL150 (ANSI std); face FF, RF, RTJ; sizes ranging from 1/2” – 24”
(iv We are one of the most acclaimed traders of stainless steel 316 flanges in the MENA region. -
Backing Ring
Add To QuoteDescription:(i) The backing ring is placed in between the ends of two pipes to secure a joint. It is then welded so that the material is melted and fused with pipes.
(ii) Backing rings are used to hold pipes and fittings together in industries like automotive, construction, and aerospace.
(iii) At Sunelwala, we offer carbon steel backing rings with pressure ANSI std CL150, CL 300, CL600, PN16; face FF; sizes ranging from 1/2” – 24”.
(iv) Looking for international standard top quality carbon steel backing ring in the MENA region, contact us now.
