-
(i) A nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.
(ii) Brass nipples offer good corrosion resistance from heat and the salt and minerals in water. Brass nipples are relatively soft, which provide an easy, tight seal during installation
(iii) SWBM Dubai, supplies an extensive range of brass nipples with pressure Sch 40, ends PBE, TBE, TOE; pipe size ranging from 1” -2” and length size Upto 150 MM.
(iv) SWBM Dubai is your one stop shop for high quality Brass Nipples in the MENA region.
Description
Material – Brass
Additional information
| Weight | 1 kg |
|---|---|
| SCHEDULE | SCH.40 |
| ENDS | PBE, TBE, TOE |
| Pipe size | 1", 1-1/2, 1-1/4, 1/2", 1/4", 2, 3/4", 3/8" |
| Length size | 50MM, 75MM, 100MM, 150MM |
Related products
-
SS316 SWING CHECK VALVE FLANGED
- Select optionsDescription:(i) Stainless Steel Check Valve Flanged allows for a large flow rate and little head loss/pressure drop across the valve due to the full bore design and recess for the disc to sit in when fully open.
(ii) It is ideally suited for liquid fuels, diesel and oils.
(iii) SWBM supplies Stainless Steel Check Valve Flanged available with material Stainless Steel 316, Flanged CL150, CL300, PN16 Face RFand sizes ranging from “1” – “12”.
(iv) At SWBM, we are leading stockists and suppliers of high quality high performing Stainless Steel Check Valve Flanged.
-
CS BALL VALVE THREADED
- Select optionsDescription:(i) Cast Steel ball valves for use in commercial and light industrial applications.
(ii) Typical services include; hot and cold domestic water, HVAC, low pressure steam, compressed air, LP gas, natural gas.
-
CAST STEEL SWING CHECK VALVE FLANGED
- Select optionsDescription:(i) Cast Steel Check Valve Flanged is made from good quality cast iron and it is entirely automatic in action
(ii) It permits flow in one direction only and close automatically if flow reverse.
(iii) SWBM supplies Cast Steel Check Valve Flanged available with material Cast Steel, Flanged CL150, JIS10K, JIS5K, PN16 Face RFand sizes ranging from “1” – “12”.
(iv) Sunelwala is one of the most acclaimed traders of Cast Steel Check Valve Flanged in the MENA region.
-
SS316 SWING CHECK VALVE THREADED
- Select optionsDescription:(i) SS Threaded check valves are suitable for steam, water and oil applications.
(ii) It can be installed in any position: vertical, horizontal, oblique.
(iii) SWBM supplies SS Check Valve Threaded available with material Stainless
Steel 316, Available in 200 WOG from Sizes 1/2″-4″.
(iv) If you need reliable Stainless Steel Check Valve Threaded, look no further than SunelWala Building Materials Dubai.